Oilpower | Hydraulic Gear Pump OPH-1

Pump Group OPH-1

Pump group OPH-1 with displacements from range of 4 cm3/rev to 28 cm3/rev and variety.

Drive Shaft options: Tang Shaft, SAE Spline, Tapered 1.5, Tapered 1.8, Parallel, Parallel 5/8.

Mounting Flange options: SAE 2 bolt, 4 bolt 36.5 spigot, 2 bolt 50 spigot, 4 bolt 80 spigot.

Ports option: German port, DT port, Threaded port, UNF Threaded port.

End cover: Standard, with relief valve.

High volumetric efficiency by innovative design and accurate control of machining tolerances.
Axial compensation achieved by the use of floating bushes that allow high volumetric efficiency throughout the working pressure range.
DU bearings ensure high pressure capability.
Shaved teeth integral gear to the control of gear tip leakage and shaft.

Pump Type		OPH-13	OPH-18	OPH-26	OPH-36	OPH-46	OPH-53	OPH-63	OPH-74	OPH-83	OPH-90
Displacement in CC/ REV		4.0	5.5	8.0	11	14	16	19	22.5	25	28
Delivery in Liter/Min at 1500 RPM		6	8.3	12	16.5	21	24	28.5	33.7	37.5	41
Max. Continuous pressure p1		250	250	250	250	250	250	220	200	180	180
Max. intermittent pressure p2		280	280	280	280	280	280	240	220	200	200
Max. peak pressure p3		300	300	300	300	300	300	260	240	220	220
Max. speed at p2		4000	4000	4000	3500	3000	3000	3000	2500	3000	3000
Min. speed at p1		600	600	600	500	500	500	500	500	500	500
Dimensions	A	41.315	42.565	44.615	47.115	49.625	51.325	53.825	56.525	58.75	59.77
Dimensions	B	82.63	85.13	89.23	94.23	99.25	102.65	107.65	113.05	117.5	119.54