Oilpower | Hydraulic Gear Pump OPH-2

Pump Group OPH-2

Pump group OPH-2 with displacements from range of 15.13 cm3/rev to 66.67 cm3/rev and variety.

Drive Shaft options: SAE Spline, Tapered 1.8, Parallel.

Mounting Flange options: SAE 2 bolt, 4 bolt 36.5 spigot, SAE A-2 Bolts Quill Drive

Ports option: German flange port, SAE port, Threaded port.

End cover: Standard

High volumetric efficiency by innovative design and accurate control of machining tolerances.
Axial compensation achieved by the use of floating bushes that allow high volumetric efficiency throughout the working pressure range.
DU bearings ensure high pressure capability.
Shaved teeth integral gear to the control of gear tip leakage and shaft.

Pump Type		OP-50	OP-70	OP-90	OP-105	OP-120	OP-146	OP-158	OP-220
Displacement in CC/ REV		15.13	21.33	27.33	31.8	36.33	44.33	47.87	66.67
Delivery in Liter/Min at 1500 RPM		22.7	32	41	47.7	54.5	66.5	71.8	100
Max. Continuous pressure p1		220	220	220	220	200	180	180	180
Max. intermittent pressure p2		230	230	230	230	220	200	200	180
Max. peak pressure p3		250	250	250	250	240	220	220	200
Max. speed at p2		3000	3000	3000	3000	3000	3000	2500	2500
Min. speed at p1		550	550	600	600	650	650	650	650
Dimensions	A	55.45	57.85	60.25	69.05	70.85	74.275	75.45	75.85
Dimensions	B	113.2	118	122.8	140.4	144	150.85	153.2	154