Tandem Pump

The OILPOWER pumps can be easily combined into Tandem Pump with different displacement groups. The versatility of our pump permits the assembling of a Tandem Pump using a single pump and making only a simply operation of assembly/ disassembly. All our standard pumps are capable to engage another pump. A two accessories gives a small stock value and mainly a rapid assistance to final users.

Features

  • High volumetric efficiency by innovative design and accurate control of machining tolerances.
  • Different pump must be assembled from biggest to the smallest in terms of required power and torque.
  • Performance of units composing multiple pumps are the same as these of the corresponding single pumps.
  • Maximum rotation speed of multiple pump is given by slower pump.
  • Maximum torque absorbed by each single unit to grant a working limit at maximum working pressure should be calculated.
  • The total of the torque absorbed by each pump shall be not in excess of the maximum followed torque on main shaft.
  • The maximum torque absorbed by the follow pump shall be not in excess of the torque transmitted by the rear draft gear.

Technical Data

Possible Multiple Group Combination.

0P + 0P
0P + 0P + 0P
0P + 0P + 0P + 0P
1P + 0P
1P + 0P + 0P
1P + 1P
1P + 1P + 0P
1P + 1P + 1P
1P + 1P + 1P + 1P
2P + 1P
2P + 1P + 0P
2P + 1P + 1P
2P + 2P
2P + 2P + 1P
2P + 2P + 2P
3P + 2P
3P + 2P + 1P
3P + 2P + 2P
3P + 2P
3P + 3P + 2P
3P + 3P + 3P